 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 Bucks Percison Gears For 7", 8", 10" and 12" Meade LX200GPSIf your 7", 8", 10" or 12" Meade LX200GPS was manufactured prior to September 2004 it has molded plastic transfer gears in the drive train. Replace these plastic gears with precision machined high strength stainless steel gears...
 |
|
|
 Buck's Precision Gears for all Meade RCX400 & Meade's 14" LX200R and LX200GPSReplace the molded plastic gears in your drive train with precision machined high strength stainless steel gears. Install a simple but positive worm engagement system. This kit not only upgrades and adjusts the scope's gears; it addresses and tunes the full mechanical drive system for both axes...
 |
|
|
 Buck's Drive Tune-Up for 8", 10" & 12" Meade LX200R & newer 7", 8", 10" & 12" Meade LX200GPSThis upgrade is intended for scopes manufactured after August 2005 when Meade started using precision brass transfer gears in the drive train. The upgrade is actually a Buck's Gears kit without the gears!
 |
|
|
 EyeOpener An EyeOpener enhances the performance of long focal length 2" eyepieces on Meade 10”, 12" and 14” LX200 scopes by increasing the eyepiece optical path size 65%...
 |
|
|
 EyeOpener™ 2" Tube AdapterThis adapter allows the attachment of anything with a 2" tube (such as a standard 2" diagonal) to be attached directly to your Meade SCT without using the microfocuser...
 |
|
|
 EZ Clutch Kit 3.5" and 5" KITWhen installed, lightly tightening the clutch knob with two fingers is all that is required to hold even the most unbalanced scope firmly in position...
 |
|
|
 EZ Focus KitIt will remove most of the backlash in Meade's focusing system and consistently provides a light precise feel to the focuser knob...
|
|
|
 EZ Balance Off Axis Counterweight™The unique feature of this counterweight is that it is on-axis. (Centered on a line that runs through the center of the tube)...
 |
|
|
 Mounting Assistant The Mounting Assistant is a super-compact 8-1/2" X 10-1/4" mounting plate designed to simplify attachment of Meade LX200GPS, Meade LX200 Classic and LX90 telescopes being used in the Alt-azimuth mode...
 |
|
|
 Get-A-Grip™ Ergonomic HandleThe rugged Get-A-Grip handles were specifically designed for Meade's 12" and 14" LX200R and LX200GPS telescopes, and then redesigned to fit the entire RCX400 scope line as well. They can also be installed on the smaller LX200R and LX200GPS scopes as well as the LX200 Classic family of telescopes. The large diameter grip area is optimally angled to match the natural bend in the arm and wrist, whether lifting the scope from the floor, carrying it across a field, or mounting it on a tall equatorial mount. (12" GPS scope shown in photos)...
 |
|
